Installation material Maintenance package for hardness greater than 14°dH / for 6, 18 and 30-month maintenance of the under-sink system
Product information
Description
Description "Installation material Maintenance package for hardness greater than 14°dH / for 6, 18 and 30-month maintenance of the under-sink system"
The maintenance set consists of:
EX 50 - 248 filter cartridge filter fineness 50µm, length 248mm
ITP activated carbon filter cartridge (poured) GAC-10. filter fineness 20µm, length 248mm Area of application: chlorine absorption
Membrane filter element GR25. Filter fineness absolute 0.2µm, length 10’ Retention 99.98%.
O-ring for filter cup ES Slim Line.
Membrane 3012 for Diluat under-sink system.
O-ring for pressure pipe 3012.
MB A6K4 ‘disposable quality’ mixed bed resin (no VOC) Mixture resin: anions: 60% - cations 40%.
Frequently Asked Questions
For regions with high water hardness above 14°dH.
It ensures the reliable operation of the system over several maintenance intervals.
A pre-filter, an activated carbon filter and a high-precision membrane filter.
It removes coarse particles such as sand or rust from the water.
The activated carbon filter reliably removes dissolved chlorine and organic impurities from the water. Thanks to the large porous surface area of the activated carbon, these substances are effectively bound and retained by adsorption. At the same time, the filter helps to reduce unwanted odours and tastes. A key function is the dechlorination of the water: free chlorine and chlorine-containing compounds are effectively filtered out.
It ensures very fine filtration with a high retention rate of 99.98%.
Mixed-bed resin helps to stabilise water quality by removing dissolved ions from the water. Over time, however, its ability to bind ions diminishes. Depending on the water flow rate and the hardness of the water, the absorption capacity for minerals, salts and silicates is gradually exhausted, causing the resin’s effectiveness to diminish and making replacement necessary.
O-rings for the filter cup and pressure pipe to ensure a secure seal.
It is an essential component of water treatment in the under-sink system. As a high-performance water filter, it ensures effective water treatment.
For 6, 18 and 30 months, depending on usage and load.