JUMO flowTRANS US W01 Ultrasonic flowmeter DN 20 (3/4 in.)
Product information
Description
Description "JUMO flowTRANS US W01 Ultrasonic flowmeter DN 20 (3/4 in.)"
Ultrasonic flow meter for DN 20 for stable and low-maintenance measurement of liquid flows in pipelines
JUMO flowTRANS US W01 Ultrasonic Flow Meter DN 20 (3/4")
In pipelines with medium nominal diameters, this flow meter enables reliable measurement of liquid flows under changing operating conditions. The ultrasonic technology operates without contact and delivers stable measurement values without being influenced by parameters such as pressure, temperature, or conductivity.
The volumetric flow rate is determined by evaluating signal transit times measured along and against the direction of flow. The difference between these transit times is used to calculate the flow velocity and convert it into a flow value. This makes the system suitable for both steady and dynamic flow conditions.
By eliminating mechanical components, the measuring point remains wear-free and requires minimal maintenance. For optimal results, the medium should have a homogeneous composition with only minimal gas or solid content.
Advantages
- Reliable measurement under changing flow conditions
- Independent of conductivity and other media properties
- Suitable for continuous monitoring in piping systems
- Low maintenance requirements during operation
Technical Data
- Measuring principle: Ultrasonic transit-time difference method
- Nominal diameter: DN 20 (3/4")
- Measurement setup: Ultrasonic sensors with external evaluation unit
- Measured variable: Volumetric flow rate
- Installation condition: Homogeneous liquids with low gas and solid content
Typical Applications
- Water distribution and supply systems
- Technical systems in industrial environments
- Process pipelines with varying flow rates
- Building services and utility installations
Frequently Asked Questions
Yes, it detects even very low flow rates and provides stable readings.
Usually just a few minutes — no lengthy preparations are required.
No, the ultrasonic measurement takes place without any obstruction in the pipe.
In many cases, no readjustment is necessary — it works straight away.
Yes, whether hard or soft water — the measurement remains stable.
Yes, JUMO offers suitable mounting kits separately to make installation even easier and safer.